YOKOGAWA µR1800 User Manual

8 - 7
IM 4H3B1-01E
8. AUXILIARY SETTINGS (AUX)
To select this periodic printout ON or OFF, proceed as follows:
MENU:
SETTING PROCEDURE:
Press the MENU-key for three seconds to enter the SET mode.
Select the ‘SET=AUX’ display using the UP/DOWN-keys, and
press the ENT-key.
Select the ‘MODE=PRINT’ display using the UP/DOWN-keys.
Then press the ENT-key.
Select the desired channel using the UP/DOWN-keys, and press
the ENT-key.
Select ON (or OFF in case you had set this periodic printout before
and want to stop it now) using the UP/DOWN-keys. Then press
the ENT-key.
The setting is completed. Press the ENT-key to return to the
‘01:DIGITAL PRINT=...’ display, or press the ESC-key to go to
the ‘SET=AUX’ display; or press the MENU-key for three
seconds to return to the Operation mode.
NOTE If set, this printout appears on the chart with a certain regularity. To change the interval
between two printouts, see 9.4.6.
MENU
ESC
PRINT
ALARM
ACK
PRINT
ALARM
ACK
PRINT
ALARM
ACK
PRINT
ALARM
ACK
SET=AUX
MODE=PRINT
01:DIGITAL PRINT=
01:DIGITAL PRINT=ON
3sec
SET OK
**
MENU
ESC
3sec
01
02
03
04
RANGE
ALARM
UNIT
CHART
CLOCK
COPY
AUX
ZONE
PART
PRINT
TAG
MSG
CHART 2
Periodic Printout
ON
8.2 Settings for Digital Printing

YOKOGAWA µR1800 Specifications

General

Brand	YOKOGAWA
Model	µR1800
Category	Data Loggers
Language	English