8. The Menu
99
As you press the Up and Down keys, the display scrolls through the list of choices.
8.4.6.1 Event Timer
The phone displays messages about the status of a call or a problem. Some of these messages are
displayed temporarily. This setting determines the period that the phone shows the message.
1. Select Menu | User Settings | Timeouts. | Event Timer.
The display changes to:
2. Use the keypad to enter a number between 2 and 10. This represents the time in seconds for
which the event will be displayed. The default value is two seconds.
3. Press the OK button.
8.4.6.2 Interdigit Timeout
When dialling a number, you signal the phone that the phone number is complete and ready to
send by pressing the # key. If you do not press the # key after dialling a number, the Dial Timeout
determines the time that the phone waits after the last digit is dialled before sending the number
to the SIP server.
1. Select Menu | User Settings | Timeouts. | Interdigit Timeout.
The display changes to:
2. Use the keypad to enter a number between 1 and 30. This represents the time in seconds for
which the event will be displayed. The default value is three seconds.
3. Press the OK button.
8.4.7 Regional Options
To configure the regional options:
1. Select Menu | User Settings | Regional Optns.
Event Timer
seconds (2..10)
}3
Interdigit Timeo
ut
}3
To Next Page
Loading...
