8. The Menu
119
8.5.6.4 Sound URL
This setting specifies the location of WAV files that are used for custom ring tones for internal and
external calls and second call tones. By controlling the WAV stored in that location, you can
ensure that only appropriate files are played to announce incoming calls.
To access this panel, select Menu | Pswd Settings | Audio | Sound URL.
When a user selects a WAV file from that location, the phone stores it in its memory. Therefore,
there is no increase in network traffic with each incoming call and no delay in announcing the call
to the user.
For an internal or external ring tone, the phone stores only the first 128 KB of any WAV file
(approximately 16.4 s of sound). When it plays the WAV file, it repeats it until the call is either
answered or terminated. For a second call tone, the phone stores only the first 8 KB of any WAV
file (approximately 1 s of sound). The phone plays this only once when a call is received.
To specify a file, type the full path name using the method described in section 6.2.5 on page 49.
The phone automatically puts the keypad in character mode for this purpose and displays F:abc
on the top row. The phone displays only 40 characters of the path. If you type more than 40
characters the phone scrolls the entire path name. When the phone first displays the path, it
shows only the first 40 characters.
The phone allows users to access the first 256 files in the directory. Therefore, you should not store
more than this. Each of the files in the directory must be encoded as 8 bit µ-law (PCM).
To prevent the use of custom ring tones, clear the string completely.
8.6 Self Test
8.6.1 Purpose
This menu selection provides options for testing the phone and the network to which it is
connected. The phone will not allow you to make or receive calls when you are conducting any
of the self tests. When you select Menu | Self Test the display shows:
Sound UR F:abc
http://intranet/
MIS/phone_sounds
Self Test
}Ping
Loop switch
Buttons & keys
LEDs
LCD
Audio
Audio Return
To Next Page
Loading...
Need help?
General
