28
ZIP2x2 User’s Manual
4.2.2.4 Accessing the Configuration Files
Every time the phone restarts (either by command or by power on), the phone may read the
configuration files. The phone extracts the data in the files and saves it to memory. This
overwrites all parameters that are saved in memory except for user settings that are not
configured to be cleared; these settings are retained in the phone.
1
For example, suppose the common configuration specifies the greeting message as:
ZIP2x2 SIP Phone
and the specific configuration specifies the greeting message as:
Freddy Phone
Then, in the idle state, the phone will display:
The phone continues to start, using the parameters that are now saved in its memory.
4.2.3 Web Interface Configuration Utility
The phone provides a web interface configuration utility, offering an alternative method of
storing information to your phone. Through this utility, you can modify all operating parameters
that are available through configuration files.
To access the web interface, enter the IP address of your phone in the address entry box of your
web browser and press the key button. The login panel will appear in your browser. See section
8.5.2.2 on page 106 for directions on finding your phone’s IP address.
[GENERAL_INFO]
software_version=1.0.0
;The message displayed on the LCD in idle mode
greeting_message=ZIP2x2 SIP Phone
password=985897
time_fmt=%H:%M
date_fmt=%m/%-d/%Y
date_time_order=0
;This is the offset from GMT, in minutes
timezone=-480
country=USA
language=ENGLISH
clear_settings=2
1. You select whether you want the user settings cleared using the menu, as described in section 8.4.3 on page 90.
Freddy Phone
02/10/2005 17:46
Figure 4-1 Format for Configuration File (Continued)