148
ZIP2x2 User’s Manual
C.4.5 Audio Information
Audio information parameters configure ring tone styles. Figure C-13 lists the Audio Information
configuration parameters.
Parameter Description
Description of
equivalent menu
command
codec Specifies speech encoding method. Valid settings are 0, 1, 2, and
3:
0 specifies G.711 µ-law
1 specifies G.711 A-law
2 specifies G.729A
3 specifies G.729AB
Default value is 0.
section 8.5.6.1 on
page 117
cust_ring2 Specifies the file that provides the call waiting tone when
ring_tone2 is set to 4 (custom). File directory is specified by
sound_url. Valid setting is string that represents the file name.
Default value is NULL string.
section 8.4.5.10 on
page 96
distinctive_ring Specifies the use of different ring tones for internal and external
calls. Valid parameter settings are ‘yes’ and ‘no’ as follows:
yes - internal and external calls use different ring tones as
specified by int_ring_tone and ext_ring_tone, respectively.
no - all calls use internal ring tone setting as specified by
int_ring_tone.
Default value is yes.
section 8.5.6.3 on
page 118
ext_call_answer Controls the auto answer feature for external calls. Valid settings
range from 0 to 2:
0 - phone rings normally
1 - phone automatically answers after one ring and routes the
caller’s voice through the external speaker
2 - phone automatically answers after one ring and routes the
caller’s voice to the handset connector
Default value is 0.
section 8.4.5.3 on
page 92
ext_cust_ring Specifies the file that provides external ring tone when
ext_ring_tone is set to 4 (custom). File directory is specified by
sound_url. Valid setting is string that represents the name of the
file.
Default value is NULL string.
section 8.4.5.10 on
page 96
ext_ring_tone Specifies the ring tone for calls received from phones outside of
the enterprise. Valid settings range from 0 to 4 as follows:
0 - ring pause
1 - ring ring
2 - short ring
3 - bell bell
4 - sound defined by custom file (see ext_cust_ring)
Default value is 0.
section 8.4.5.1 on
page 92
Figure C-13 Audio Information Configuration Parameters