170
ZIP2x2 User’s Manual
Language. This selection determines the language that the phone uses to display information on
the LCD. Select the desired language in the data entry box. Section 8.4.7.2 on page 101 describes
the equivalent menu command.
Date and time. This selection determines the order that the phone displays the time and the date.
Select the desired format in the data entry box. Section 8.4.7.3 on page 101 describes the
equivalent menu command.
Time format. This selection determines the format that the phone displays the time of day. Select
the desired format in the data entry box from one of the provided options. Section 8.4.7.4 on page
102 describes the equivalent menu command.
Date format. This selection determines the format for displaying the current date. Section 8.4.7.5
on page 102 describes the equivalent menu command.
E.5.5 Factory Defaults
The Factory Defaults panel, as shown in figure E-15, restores the factory defaults for all
configuration settings. To access the Factory Defaults panel, select User Settings | Factory
Defaults from the interface menu. Section 8.4.8 on page 102 describes the equivalent menu
command.
E.6 Protected Settings
Protected Settings menu panels alter the communication parameters of the phone. You may need
to configure these parameters if your system does not support automatic provisioning.
Each Protected Settings parameter is protected by a password. If you do not login with the correct
password, all Protected Settings pages will be read only and the Update button will be disabled.
Figure E-15 User Settings – Factory Defaults panel
To Next Page
Loading...
Need help?
General
