102
ZIP2x2 User’s Manual
8.4.7.4 Time Format
This parameter specifies the format used by the LCD to display time.
1. Select Menu | User Settings | Regional Optns | Time Format. The phone displays the time
format menu:
In 24 hour format the phone always uses two digits for the hour. For example
In 12 hour format the phone uses one or two digits for the hour and appends an ‘a’ or ‘p’ at
the end after the minutes. For example
2. Select the desired format with the Up and Down keys.
3. Press the OK button to enable your selection and return to the Regional Optns menu.
8.4.7.5 Date Format
This parameter specifies the format used by the LCD to display the date.
1. Select Menu | User Settings | Regional Optns | Date Format.
The display shows the available date formats. This figure shows five rows, though in practice
the display can show only three rows at once.
2. Select the desired format with the Up and Down keys.
3. Press the OK button to enable your selection and return to the Regional Optns menu.
8.4.8 Factory Defaults
This option resets the phone parameters to their original, factory installed values.
1. Select Menu | User Settings | Factory default. The phone displays a confirmation menu:
Set | Time Frmt
}24 hour
12 hour
09:30
9:30a
Set | Date Frmt
}01/26/2005
01-26-2005
2005/01/26
2005-01-26
Restore factory
settings?
}No Yes
To Next Page
Loading...
Need help?
General
