8. The Menu
89
Audio. Select the ring tones. See section 8.4.5 on page 91.
Timeouts. Determine the timeout periods for display messages and sending dialled digits. See
section 8.4.6 on page 98.
Regional Optns. Select the country and language settings and date and time display format. See
section 8.4.7 on page 99.
Factory Default. Restores all phone parameters to their original factory settings. See section 8.4.8
on page 102.
Important To ensure that the changes you make to the settings remain after you power up
the phone, select Never under the menu Clear settings, described in section 8.4.3
on page 90.
8.4.1 LCD Contrast
You alter the contrast to improve readability. The readability is affected by the ambient light, the
room temperature, and the angle at which you view the display. To change the contrast, select
Menu | User Settings | Contrast. The display changes to:
Use the Up and Down keys to change the contrast. The display gets darker as the number
increases. There are 20 steps, numbered 1 to 20. The bar on the bottom of the display is a graphical
representation of the setting.
8.4.2 Greeting Message
This setting determines the message that the top row of the display shows when the phone is idle
(see section 5.4.1 on page 40). When shipped from the factory, the greeting message is set to
To change the greeting message:
1. Select Menu |User Settings | Greeting.
2. The display changes to:
3. The phone displays the current greeting message so you can edit it. Use the method
described in section 6.2.5 on page 49 to edit and change an alphanumeric message.
The phone has already enabled alphanumeric mode for this purpose.
4. Press the OK button when done, or the Esc button to cancel.
Contrast
14
•••••••••••
ZIP2x2 SIP Phone
Settings F:abc
Greeting Message
ZIP 2x2 Pho•
To Next Page
Loading...
Need help?
General
