126
ZIP2x2 User’s Manual
The phone is silent for 500 ms then it replays the audio that it recorded to the handset:
3. The phone repeats the test, using the external speaker and microphone instead of the
handset. Speak into the microphone used for speaker mode for this test.
4. Press Menu, Esc, or OK at any time to exit this test. If you press Menu, the phone exits the
menu system. If you press OK or Esc, or if the test has completely finished, the phone
displays the Self Test menu shown in section 8.6.1 on page 119.
8.6.8 Audio Return
The Audio Return test generates audio feedback to evaluate the audio paths on the phone. This
test is normally performed before the phone is shipped and should be executed by the user only
as instructed by Zultys technical support.
Test | Audio
Replaying sound
Test | Audio
Speak to basend
To Next Page
Loading...
Need help?
General
