6. Using the Phone
53
If the phone has an FQDN, you might enter:
8. If you want to repeatedly make calls in this manner, enter the address into a memory
location, as described in section 8.2.2 on page 81. Dial the number from memory as described
in section 6.7.2 on page 65.
6.3 Call Proceeding and Call Answered
6.3.1 Calling
When you have started to make a call, the display changes to:
The display shows the call appearance that is in use for this call and the number or address being
called. The display indicates the time (minutes and seconds) since you started the call and reflects
the time that you have been waiting for the call to connect.
The phone displays the called number on the second line. In the unlikely event that the number
is greater than 16 digits, the phone displays the rest of the number on the third line.
If the number that you have dialled is in your phone book, the phone displays the name of the
called party instead of the phone number. It will display the name on the second and third lines:
or:
The phone will continue to use this name instead of the number for future displays during this
call.
If you have dialled the person using a SIP address, the phone will display this instead of a
number. It will try to break the name at a period (full stop), “at” symbol, or other punctuation.
The LED on the call appearance button flashes green for 750 ms and off for 250 ms.
You will hear nothing during this phase of the call.
1. Call F:abc
West@Zultys.com
1. Calling
4083280450
0:17
1. Calling
Bonnie Hopkins
0:17
1. Calling
Zultys Technolog
ies 0:17
To Next Page
Loading...
Need help?
General
