84
ZIP2x2 User’s Manual
The phone places the cursor at the end of the name, address, or number. Edit it as described
in section 6.2.6 on page 51.
If you did not earlier enter a name or an address, the phone still allows you to edit these later,
allowing you to complete them as required. When you press the OK button, the phone gives
you the opportunity to complete blank fields.
You can edit a contact to assign a different memory location. The location you assign must
be currently unused.
5. When you have completed editing the information, the phone indicates it has saved the
information and you can dial the contact or exit the function.
8.2.4 Delete
To delete the information you have saved about a contact:
1. Select Menu | Phone Book | Delete.
2. The display shows:
The phone automatically places the keypad in character mode and shows F:abc on the top
row.
3. Find the name of the contact as you would if you were searching for a contact as described
in section 8.2.1 on page 80.
4. Press the OK button when you have located the contact you want to delete.
5. The phone displays:
6. Use the Up and Down keys to select Yes.
If you do not want to delete this entry, select No, or press the Esc button.
7. Press the OK button to delete the information.
The phone removes the entry from its memory and displays the phone book menu.
Delete F:abc
}lanc
Lance Capel
Brown
Delete? }No Yes