Zultys ZIP2x2 User Manual

C. Configuration Files
149
hold_tone This tone is played once every 30 seconds when you have a call
that is on hold. Valid settings range from 0 to 2 as follows:
0 - off
1 - beep
2 - bleep
Default value is 0.
section 8.4.5.7 on
page 95
int_call_answer Controls the auto answer feature for internal calls. Valid settings
are 0 and 1:
0 - phone rings normally
1 - phone automatically answers after one ring and routes the
caller’s voice through the external speaker
Default value is 0.
section 8.4.5.4 on
page 93
int_call_disconnect Controls the phone behavior after the other party disconnects a
phone call. Valid settings are 0, 1, and 2:
0 - phone plays the busy tone until you hang up
1 - phone plays a busy tone twice (five seconds) before
disconnecting
2 - phone disconnects without playing any tone
Default value is 0.
section 8.4.5.5 on
page 94
int_cust_ring Specifies the file that provides internal ring tone when
int_ring_tone is set to 4 (custom). File directory is specified by
sound_url. Valid setting is string that represents the name of the
file.
Default value is NULL string.
section 8.4.5.10 on
page 96
int_ring_tone Specifies the ring tone for calls received from phones inside the
enterprise. Also specifies the ring tone for all calls if
distinctive_ring is set to ‘no’. Valid settings range from 0 to 4 as
follows:
0 - ring pause
1 - ring ring
2 - short ring
3 - bell bell
4 - sound defined by custom file (see int_cust_ring)
Default value is 0.
section 8.4.5.2 on
page 92
key_click Specifies the tone that the phone emits when you press a button
or a non numeric key. Valid settings range from 0 to 3 as follows:
0 - off
1 - click
2 - beep
3 - bleep
Default value is 0.
section 8.4.5.8 on
page 95
Parameter Description
Description of
equivalent menu
command
Figure C-13 Audio Information Configuration Parameters (Continued)

Zultys ZIP2x2 Specifications

General

Brand	Zultys
Model	ZIP2x2
Category	IP Phone
Language	English