116
ZIP2x2 User’s Manual
To access this panel, select Menu | Pswd Settings | Names & Numbers | Device ID.
8.5.5.2 Domain Name
Domain Name specifies the domain name for the enterprise. This parameter has no default value
and you must therefore complete this panel. The phone can obtain this information from the
DHCP server. This is always specified as an FQDN, so the phone automatically enables character
entry mode.
To access this panel, select Menu | Pswd Settings | Names & Numbers | Domain Name.
8.5.5.3 Voice Mail
This parameter specifies the name or number of the server that stores voice mail. The name or
number of the voice mail server is saved at memory location 00. You can dial it by pressing the
Msg button.
1
When the phone needs to access the voice mail server, it sends the call to:
<voice mail number>@<SIP outbound proxy server>
For example:
5500@10.1.30.194
You can enter a name for the address of the voice mail. Therefore, any of the following is valid:
voice.mail@10.1.30.194
voice.mail@SIP.Zultys.com
5500@SIP.Zultys.com
To access this panel, select Menu|PswdSettings|Names&Numbers|Voice Mail. The voice
mail parameter has the default value of
voice.mail
If this value is acceptable, you do not need to modify it. The phone can obtain this information
from the configuration file accessed from the TFTP server.
PSettings
Device ID
}
PSettings
Domain name
}Zultys.com
1. See section 7.1 on page 71 for accessing the voice mail using the Msg button.
PSettings
Voice mail
}voice.mail
To Next Page
Loading...
Need help?
General
