C. Configuration Files
145
C.4.3.1 Programming Restrictions: Time Format
Figure C-8 lists the two time format (time_fmt) tag combinations supported by the phone. The
phone will not properly update the time and date if an unsupported combination is used.
C.4.3.2 Programming Restrictions: Date Format
Figure C-9 lists the valid date formats when you select a time format that does not display
seconds. The phone will not properly update the time and date if an unsupported combination
is used.
software_version Specifies the software version that the phone must use. If the
phone is running a different version, it will attempt to load the
correct version from the TFTP server.
None. For more
information, see
section 4.4.2 on
page 31
time_fmt Specifies the format for the LCD time display. Valid entry is a
text string that uses the time format tags listed below. Ssection
C.4.3.1 lists the valid format tag combinations.
Format tags include:
%H - hour in 24-hour format (00-23)
%l - hour in 12-hour format (01-12)
%M - minute as decimal number (00-59)
%f - am/pm indicator for 12-hour clock
Enter other characters (such as : )
Example: %I:%M%f yields the following:
5:45p
Default: %H:%M
(sample default: 15:45).
section 8.4.7.4 on
page 102
timezone Specifies the timezone location of the phone. Parameter value is
the offset from GMT in minutes; valid settings range from -720
to +720.
Default value is -480.
None
Time Format Format String
24 hour format: display hours and minutes %H:%M
12 hour format: display hours and minutes %l:%M%f
Figure C-8 Time Format Strings Supported by the ZIP2x2 and ZIP2x1
Date Format Format String
10/6/2003 %m/%-d/%Y
Figure C-9 Date Format Strings Supported by the ZIP2x2 and ZIP2x1
Parameter Description
Description of
equivalent menu
command
Figure C-7 General Information Parameters (Continued)