Zultys ZIP2x2 User Manual

E. Web Interface Configuration Utility
175
Registrar Port. This parameter specifies the SIP Registrar server port. The default value is 5060.
Section 8.5.3.3 on page 111 describes the equivalent menu command.
Phone SIP Port. This panel displays the TCP or UDP port number the phone uses to receive SIP
messages. Section 8.5.3.5 on page 112 describes the equivalent menu command.
RTP Starting Port. The phone uses consecutively numbered RTP and RTCP port numbers
(actually UDP port numbers) for communication. RTP carries media and RTCP carries control
information. The default RTP start port is 1760. Section 8.5.3.4 on page 111 describes the
equivalent menu command.
Transport Protocol. This parameter specifies the protocol used to transport SIP messages. Section
8.5.3.6 on page 112 describes the equivalent menu command.
Figure E-19 Protected Settings – SIP Communications panel

Zultys ZIP2x2 Specifications

General

Brand	Zultys
Model	ZIP2x2
Category	IP Phone
Language	English