18
ZIP2x2 User’s Manual
• flashes orange and off four times
• red on for one second
• green on for one second
• orange on for one second
• off for one second
Observe the LEDs and verify that they all function.
2. While the LEDs are flashing, the LCD changes between the two following fixed graphical
patterns in rhythm with the LEDs:
Observe the LCD and verify that all segments are turned on and off.
3. Press the Fn button to begin the Keypad test.
This test requires that you push each button in sequence, starting with the button in the top
left corner of the keypad and proceeding right.
4. The first four buttons that you should press, in order, are Call 1, Call 2, Msg/Encrypt, and
DND/Fwd.
When you press a button in proper order, the phone displays a mark in the corresponding
space of the display. If you press a button out of order, the phone beeps. After pressing the
first four buttons the display shows:
5. After pressing all of the buttons on a row, proceed to the next row of buttons. Each display
row corresponds to two rows of buttons. After you press each button in the first four rows,
the display shows:
•••• Keypad
Press each butto
n in turn
••••••••pad
••••••••ch butto
n in turn
To Next Page
Loading...
Need help?
General
