42
ZIP2x2 User’s Manual
5.4.3.4 Display on LCD
When you access the menu, the top row on the LCD shows the menu item. The second and third
rows show menu choices. The currently selected item has an arrow in the first row of the display.
An example is shown:
When you press the Down key, the arrow moves down, so the above screen would look like:
When you press the Down key again, the phone displays the next menu item, keeping the arrow
on the bottom row:
As you continue to press the Down key, the phone shows each of the menu selections in turn,
wrapping round to the first menu selection once it has displayed the last.
If you press the Up key when the above display is shown, the arrow moves up to select the
previous item:
As you continue to press the Up key, the phone shows each of the menu selections in turn,
wrapping round to the last menu selection once it has displayed the first.
To select the item pointed to by the arrow, press the OK button. This action may also show an
item further into the menu structure, or it may move you up one item in the menu structure. The
top row on the LCD informs you where you are in the menu structure.
To move back through the menu structure press the Esc button. If you point to an item in the
menu that you want to select and press Esc instead of OK, the phone does not change the value
of the parameter.
For example, if you pressed the OK button when the display was as above, you would select the
country to be Austria, and the display would change to:
Settings | Count
}Australia
Austria
Settings | Count
Australia
}Austria
Settings | Count
Austria
}Bahrain
Settings | Count
}Austria
Bahrain
Set | Regional
}country
language
To Next Page
Loading...
Need help?
General
