6. Using the Phone
47
• The phone selects speaker mode and provides dial tone to the speaker.
2. The phone shows:
The number on the first row is the call appearance that has been reserved for this call.
3. Enter the digits.
• The phone displays the digits as you enter them:
• The phone plays the DTMF digits to the handset or speaker as appropriate while you type
them.
• The phone flashes the LED on the call appearance button fast, which is a prompt for you
to press it.
4. When you have entered all the digits, do one of the following:
a. Press the # key.
1
b. Press the call appearance button that is flashing green.
2
c. Wait for the dial timeout to expire, after which time the phone assumes that you have
entered all the digits.
3
5. The phone plays the DTMF digit for the # key.
6. The phone sends the dialled digits. It plays no sound while doing this.
7. The phone changes the display to (for example):
The first line of the display shows the call appearance that is being used for the call.
8. The phone indicates the call appearance that is being used by changing the flashing for the
LED on the call appearance button. The LED will be lit for 750 ms and flash off for 250 ms.
9. While the call is proceeding, the phone plays ringback tone. This tone is generated by the
phone according to the country that you selected.
10. When the call is established (the called party has answered) the phone lights the LED on the
call appearance button green continuously.
1. Call
•
1. Call
40883280
1. If you want to send a # digit as part of the dialled name or number, see section 6.2.3 on page 48.
2. If you press any other call appearance button, the phone will clear the display and assume you want to make a new call.
3. For instructions on setting the dial timeout, see section 8.4.6.2 on page 99.
1. Calling
4083280450
To Next Page
Loading...
Need help?
General
