68
ZIP2x2 User’s Manual
c. The phone plays dial tone that can be heard by the other participant.
d. The phone flashes the LED on the call appearance button green to indicate it has
reserved the call appearance.
e. Dial a name or number using the keypad or by selecting a recent number either called
or received. The other participant can hear the DTMF digits as you dial them.
f. As the call proceeds, the phone changes the LED on the call appearance button as
described in section 6.2 on page 46. The other participant in the conference call can hear
the call progress tones.
g. Once the called party answers, he or she is immediately in the conference call and all
participants can hear the conversation. The phone changes the LED of the call
appearance button to continuous orange.
2. If you do not want the other person on the conference call to hear you make the call, or you
want to speak privately to the person prior to him or her joining the conference call:
a. Press the Hold button.
b. The phone puts the other call on hold and flashes the LED on its call appearance button
orange.
c. Make a new call by one of the methods described in section 6.2 on page 46.
d. When the called party answers, the phone turns the call appearance LED to continuous
green. You can converse with the person without the other person listening.
e. If you do not want the person that you have called to join the conference call:
• Press the call appearance button that is lit continuously green. That terminates the call.
• Press the call appearance button that is flashing orange to resume that call without the
person you just called.
f. If you want the person you just called to join the conference call, press the Conf button.
The phone lights the LED on the call appearance button to be continuously orange.
6.8.5.2 Incoming
To answer an incoming call, do one of the following:
1. If you want the other person to hear you answer the call:
a. Press the Conf button.
b. The phone immediately joins the calling party to the conference call.
c. The phone changes the LED of the call appearance button to continuous orange.
2. If you do not want the other person on the conference call to hear you answer the call, or
you want to speak privately to the person prior to him or her joining the conference call:
a. Press the Hold button to place the other person on hold.
b. Press the call appearance button that indicates the incoming call.
1. If the phone does not have an inactive call appearance, pressing the Conf button has no effect.
To Next Page
Loading...
