82
ZIP2x2 User’s Manual
6. To a number, type a string of digits such as:
You should not append a # character to the end of the phone string.
You can enter punctuation characters, for example:
The phone stores the characters that you enter, but when you dial, the phone sends only the
digits to the phone system.
Remember to precede the number with the access code for an outside line if the
administrator of the system has configured the dial plan to require it.
7. To save a SIP address instead of a number, press the Fn key to enter character mode and
enter the address of the contact as described in section 6.2.5 on page 49.
If the address is greater than 15 characters, the display scrolls to show just 15 characters:
The maximum length of the SIP URI can be 64 characters. After you have typed the 64th
character the cursor remains on the last character. If you try to add more characters, the
phone plays the DTMF digit for the # key and replaces the last character in the SIP URI with
the last typed character.
You do not need to precede the address with the word SIP and a colon character. The phone
automatically includes these for you in the outgoing message. If you want to type the
characters, you can do so:
8. When you have finished entering the address (SIP URI or number), press the OK button.
You can enter a name and save it into memory without entering an address or a number, but
you cannot dial that contact.
Address:
}1485
Address:
}9-(408)328-0450
Address: F:abc
}lance.capabilit
Address: F:abc
}apability.brown
Address: F:abc
}SIP:lancelot.c•
To Next Page
Loading...
Need help?
General
