Chapter 7 VLAN
GS3700/XGS3700 Series User’s Guide
108
Figure 67 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
The following table describes the related labels in this screen.
Table 45 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
LABEL DESCRIPTION
ACTIVE Select this check box to activate the VLAN settings.
Name Enter a descriptive name for the VLAN group for identification purposes. This name
consists of up to 64 printable characters; spaces are allowed.
VLAN Group ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
VLAN Type Select Normal (static) or Private. For Private VLANs, select Prim ary, I solated or
Com munity.
Association VLAN
List
Prim ary private VLANs can associate with several (secondary) Comm unity private VLANs
and up to one (secondary) I solated private VLAN.
You only configure VLAN Association List for Prim ary private VLANs. Use a dash to
associate consecutive VLANs and a comma (no spaces) to associate non-consecutive
VLANs. For example, 51-53 includes 51, 52 and 53, but 51,53 does not include 52.
Secondary private VLANs can only be associated with one primary private VLAN.
Slot (Stacking
mode)
This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
To Next Page
Loading...
