Chapter 6 Basic Setting
GS3700/XGS3700 Series User’s Guide
66
You can configure up to 128 IP domains which are used to access and manage the Switch from the
ports belonging to the pre-defined VLAN(s).
Note: You must configure a VLAN first. Each VLAN can only have one management IP
address.
Figure 29 Basic Setting > IP Setup
The following table describes the labels in this screen.
6.5.2 IP Status Details
Use this screen to view IP status details. Click a number in the I ndex column in the I P Status
screen to display the screen as shown next.
Figure 30 Basic Setting > IP Setup > IP Status Details: Static
The following table describes the labels in this screen.
Table 14 Basic Setting > IP Setup
LABEL DESCRIPTION
Index This field displays the index number of an entry.
IP Address This field displays IP address of the Switch in the IP domain.
IP Subnet Mask This field displays the subnet m ask of the Switch in the IP dom ain.
VID This field displays the VLAN identification number of the IP domain on the Switch.
Type This shows whether this IP address is dynamically assigned from a DHCP server or
manually assigned (Static).
Renew Click this to renew the dynamic IP address.
Release Click this to release the dynamic IP address.
Table 15 Basic Setting > IP Setup > IP Status Details: Static
LABEL DESCRIPTION
Type This shows whether ths IP address is dynamically assigned from a DHCP server or manually
assigned (Static or DHCP).
VID This is the VLAN identification number to which an IP routing domain belongs.
IP Address This is the IP address of your Switch in dotted decimal notation for example 192.168.1.1.
IP Subnet Mask This is the IP subnet mask of your Switch in dotted decimal notation for example
255.255.255.0.
To Next Page
Loading...
