Chapter 11 Spanning Tree Protocol
GS3700/XGS3700 Series User’s Guide
147
11.8 Configure Multiple Spanning Tree Protocol
To configure MSTP, click MSTP in the Advanced Application > Spanning Tree Protocol screen.
See
Section 11.1.5 on page 134 for more information on MSTP.
Designated Cost This field displays the path cost to the LAN segment to which the port is connected when
the port is a designated port. Otherwise, it displays the path cost to the root bridge from
the designated port for the LAN segament to which this port is connected.
Root Guard State
(Standalone
mode)
This field displays the state of the port on which root guard is enabled.
• Root - inconsistent - the Switch receives superior BPDUs on the port and blocks the
port.
• Forw arding - the Switch unbolcks and allows the port to forward frames again.
Table 61 Advanced Application > Spanning Tree Protocol > Status: MRSTP (continued)
LABEL DESCRIPTION
To Next Page
Loading...
