ZyXEL Communications GS3700 Series - OAM Details

Chapter 38 OAM
GS3700/XGS3700 Series User’s Guide
383
The following table describes the fields in the above screen.
38.2.1 OAM Details
Use this screen to view OAM configuration details and operational status of a specific port. Click a
number in the Port column in the OAM Status screen to display the screen as shown next.
Table 186 Advanced Application > OAM Status
LABEL DESCRIPTION
Slot (Stacking mode) This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Local
This section displays information about the ports on the Switch.
Port This field displays the number of the port on the Switch. In stacking mode, the first
box field is the slot ID and the second field is the port number. * means all ports (on
the same Switch).
Mode This field displays the operational state of the port when OAM is enabled on the port.
Active - Allows the port to issue and respond to Ethernet OAM commands.
Passive - Allows the port to respond to Ethernet OAM commands.
Rem ote
This section displays information about the remote device.
Mac Address This field displays the MAC address of the remote device.
OUI This field displays the OUI (first three bytes of the MAC address) of the remote device.
Mode This field displays the operational state of the port when OAM is enabled on the port.
Active - Allows the port to issue and respond to Ethernet OAM commands.
Passive - Allows the port to respond to Ethernet OAM commands.
Config This field displays the capabilities of the Switch and remote device.