GS3700/XGS3700 Series User’s Guide
199
CHAPTER 18
Time Range
This chapter shows you how to set up a time range for time-oriented features on the Switch.
18.1 About Time Range
You can set a time range for time-oriented features such as Classifier ACL (Access Control List) rule
which categorizes data packets into different network traffic flow. The advantage of the time range
feature is that it allows you to schedule the active time of configurations. For example, see Section
19.2 on page 201 to configure the classifier rule with time range.
The time range can be configured in two ways - Absolute and Periodic. Absolute is a fixed time
range with a start and end time. Periodic is recurrence of a time range and doesn’t have an end
time.
18.2 Time Range Setup
Click Advanced Application > Tim e Range in the navigation panel to display the screen as
shown.
Figure 137 Advanced Application > Time Range
To Next Page
Loading...
