ZyXEL Communications GS3700 Series - Ipv6

Chapter 6 Basic Setting
GS3700/XGS3700 Series User’s Guide
80
6.9 IPv6
Use this screen to view the IPv6 interface status and configure Switch’s management IPv6
addresses. See Appendix B on page 517 for more information about IPv6.
Click Basic Setting > I Pv6 in the navigation panel to display the IPv6 status screen as shown
next.
Figure 43 Basic Setting > IPv6 Status
The following table describes the labels in this screen.
6.9.1 IPv6 Interface Status
Use this screen to view a specific IPv6 interface status and detailed information. Click an interface
index number in the Basic Setting > I Pv6 screen. The following screen opens.
Index This field displays the index number of an entry.
Interface Type This field displays the type of interface.
Interface ID This field displays the identification number of the interface.
Interface This field displays the interface’s descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the check boxes.
Table 22 Basic Setting > Interface Setup (continued)
LABEL DESCRIPTION
Table 23 Basic Setting > IPv6 Status
LABEL DESCRIPTION
Index This field displays the index number of an IPv6 interface. Click on an index number to view
more interface details.
Interface This is the name of the IPv6 interface you created.
Active This field displays whether the I Pv6 interface is activated or not.