Chapter 6 Basic Setting
GS3700/XGS3700 Series User’s Guide
95
Figure 57 Basic Setting > Stacking Status
The following table describes the labels in this screen.
6.10.2 Stacking Slot
Click Basic Setting > Stacking > Stacking Status > Slot num ber in the navigation panel to
display the Stacking Slot Status screen as shown next.
Table 36 Basic Setting > Stacking > Stacking Status
LABEL DESCRIPTION
Slot ‘Slot’ refers to a Switch in t he the ‘virtual chassis’ stack. This field displays t he slot ID of the
stacked Switch. You can click the ID number to go to the Stacking Slot Status screen.
Name This field displays the model name of the stacked Switch.
Status This field displays whether the stacked Switch is active or inactive in a stack system. I nit
means the slot ID is initialized by the master Switch.
MAC address This field displays the MAC address of the stacked Switch.
Role This field displays whether the Switch is a master, backup or linecard. There’s only one
master and one backup Switch in the stacking model; all others are linecard Switches.
Stacking Topology: Ring/ Chain
Slot No. This field displays the slot ID number of the stacked Switch.
Stacking Channel1
Neighbor This field displays the neighbor Switch that is connected using slot channel 1 of the Switch.
Speed This field displays the Ethernet speed of stacking channel 1 of the Switch.
Stacking Channel2
Neighbor This field displays the neighbor Switch that is connected to slot channel 2 of the Switch.
Speed This field displays the Ethernet speed of stacking channel 2 of the Switch.
To Next Page
Loading...
