ZyXEL Communications GS3700 Series - IPv6 Configuration

Chapter 6 Basic Setting
GS3700/XGS3700 Series User’s Guide
83
6.9.2 IPv6 Configuration
Use this screen to configure IPv6 settings on the Switch. Click the I Pv6 Configuration link in the
Basic Setting > I Pv6 screen. The following screen opens.
Figure 45 Basic Setting > IPv6 > IPv6 Configuration
The following table describes the labels in this screen.
6.9.3 IPv6 Global Setup
Use this screen to configure the global IPv6 settings. Click the link next to I Pv6 Global Setup in
the I Pv6 Configuration screen to display the screen as shown next.
Table 25 Basic Setting > IPv6 > IPv6 Configuration
LABEL DESCRIPTION
IPv6 Global Setup Click the link to go to a screen where you can configure the global IPv6 settings on the
Switch.
IPv6 Interface Setup Click the link to go to a screen where you can enable an IPv6 interface on the Switch.
IPv6 Addressing
IPv6 Link-Local
Address Setup
Click the link to go to a screen where you can configure the IPv6 link-local address for
an interface.
IPv6 Global
Address Setup
Click the link to go to a screen where you can configure the IPv6 global address for an
interface.
IPv6 Neighbor
Discovery
IPv6 Neighbor
Discovery Setup
Click the link to go to a screen where you can configure the IPv6 neighbor discovery
settings.
IPv6 Router
Discovery Setup
Click the link to go to a screen where you can configure the IPv6 router discovery
settings.
IPv6 Prefix Setup Click the link to go to a screen where you can configure the Switch’s IPv6 prefix list.
IPv6 Neighbor Setup Click the link to go to a screen where you can create a static IPv6 neighbor entry in the
Switch’s IPv6 neighbor table.
DHCPv6 Client Setup Click the link to go to a screen where you can configure the Switch DHCP settings.