Chapter 6 Basic Setting
GS3700/XGS3700 Series User’s Guide
76
The following table describes the labels in this screen.
6.7.2 PoE Setup
Use this screen to set the priority levels for the Switch in distributing power to PDs.
Click Basic Setting > PoE Setup in the navigation panel to display the screen as shown.
Figure 40 Basic Setting > PoE Setup > PoE Setup (Standalone mode)
Table 20 Basic Setting > PoE Setup > PoE Time Range Status
LABEL DESCRIPTION
Port This is the number of the port on the Switch.
Time Range This field displays the name of the schedule which is applied to the port. PoE is enabled
at the specified time/date.
state This field displays whether the port can receive power from the Switch (In) or not
(Out) currently.
It shows - if there is no schedule applied to the port.
To Next Page
Loading...
