ZyXEL Communications GS3700 Series - Port Security; About Port Security; Port Security Setup

GS3700/XGS3700 Series User’s Guide
195
CHAPTER 17
Port Security
This chapter shows you how to set up port security.
17.1 About Port Security
Port security allows only packets with dynamically learned MAC addresses and/or configured static
MAC addresses to pass through a port on the Switch. The Switch can learn up to 32K MAC
addresses in total with no limit on individual ports other than the sum cannot exceed 32K.
For maximum port security, enable this feature, disable MAC address learning and configure static
MAC address(es) for a port. It is not recommended you disable port security together with MAC
address learning as this will result in many broadcasts. By default, MAC address learning is still
enabled even though the port security is not activated.
17.2 Port Security Setup
Click Advanced Application > Port Security in the navigation panel to display the screen as
shown.