ZyXEL Communications GS3700 Series - LLDP Remote Status

Chapter 35 Link Layer Discovery Protocol (LLDP)
GS3700/XGS3700 Series User’s Guide
352
35.5 LLDP Remote Status
This screen displays a summary of LLDP status for each LLDP connection to a neighboring Switch.
Click Advanced Application > LLDP > LLDP Rem ote Status to display the screen as shown
next.
Figure 255 Advanced Application > LLDP > LLDP Remote Status (Standalone mode)
Figure 256 Advanced Application > LLDP > LLDP Remote Status (Stacking mode)
The following table describes the labels in this screen.
35.5.1 LLDP Remote Port Status Detail
This screen displays detailed LLDP status of the remote device conencted to the Switch. Click
Advanced Application > LLDP > LLDP Remote Status and then click an index number, for
example 1, in the I ndex column in the LLDP Remote Status screen to display the screen as
shown next.
Table 170 Advanced Application > LLDP > LLDP Remote Status
LABEL DESCRIPTION
Slot (Stacking
mode)
This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Index The index number shows the number of remote devices that are connected to the
Switch. Click on an index number to view the detailed LLDP status for this remote device
in the LLDP Remote Port Status Detail screen.
Local Port This is the number of the Switch’s port that received LLDPDU from the remote device. In
stacking mode, the first number represents the slot and the second the port number.
Chassis ID This displays the chassis ID of the remote device associated with the transmitting LLDP
agent. The chassis ID is identified by the chassis ID subtype. For example, the MAC
address of the remote device.
Port ID This is an alpha-numeric string that contains the specific identifier for the port from
which this LLDPDU was transmitted. The port ID is identified by the port ID subtype.
Port Description This displays a description for the port from which this LLDPDU was transmitted.
System Name This displays the system name of the remote device.
Management
Address
This displays the management address of the remote device. It could be the MAC
address or IP address. You can click on the IP address hyperlink directly.