ZyXEL Communications GS3700 Series - DHCPv4 Status; DHCPv4 Server Status Detail

Chapter 43 DHCP
GS3700/XGS3700 Series User’s Guide
414
and create option 82 profiles. Click the link next to DHCPv6 to open screens where you can
configure DHCPv6 settings.
Figure 303 IP Application > DHCP
43.3 DHCPv4 Status
Click I P Application > DHCP > DHCPv4 in the navigation panel. The DHCP Status screen
displays.
Figure 304 IP Application > DHCP > DHCPv4
The following table describes the labels in this screen.
43.3.1 DHCPv4 Server Status Detail
Click I P Application > DHCP > DHCPv4 in the navigation panel and then click an existing index
number of a DHCP server configuration to view the screen as shown. Use this screen to view details
regarding DHCP server settings configured on the Switch.
Table 201 IP Application > DHCP > DHCPv4
LABEL DESCRIPTION
Server Status This section displays configuration settings related to the Switch’s DHCP server mode.
Index This is the index number. Click an index number to change the settings.
VID This field displays the VLAN ID for which the Switch is a DHCP server.
Server Status This field displays the starting DHCP client IP address.
IP Pool Size This field displays the number of IP addresses that can be assigned to clients.
Relay Status This section displays configuration settings related to the Switch’s DHCP relay mode.
Relay Mode This field displays:
• None - if the Switch is not configured as a DHCP relay agent.
• Global - if the Switch is configured as a DHCP relay agent only.
• VLAN - followed by a VLAN ID or multiple VLAN IDs if it is configured as a relay
agent for specific VLAN(s).