ZyXEL Communications GS3700 Series - SNMP Traps

Chapter 48 Access Control
GS3700/XGS3700 Series User’s Guide
461
48.3.3 SNMP Traps
The Switch sends traps to an SNMP manager when an event occurs. The following tables outline the
SNMP traps by category.
An OI D (Object ID) that begins with “1 .3.6.1.4.1.890 .1.15” is defined in private MIBs. Otherwise,
it is a standard MIB OID.
Table 230 SNMP System Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
coldstart coldStart 1.3.6.1.6.3.1.1.5.1 This trap is sent when the Switch is
turned on.
warmstart warmStart 1.3.6.1.6.3.1.1.5.2 This trap is sent when the Switch
restarts.
fanspeed zyHwMonitorFanSpeedOutOfR
ange
1.3.6.1.4.1.890.1.15.3.26.2.1 This trap is sent when the fan speed goes
above or below the normal operating
range.
poe
(For PoE
models
only)
zyPoePowerPortOverload 1.3.6.1.4.1.890.1.15.3.59.4.1This trap is sent when the port is turned
off to supply power due to overloading.
zyPoePowerPortShortCircuit 1.3.6.1.4.1.890.1.15.3.59.4.2 This trap is sent when the port is turned
off to supply power due to short circuit.
zyPoePowerPortOverSyst em B
udget
1.3.6.1.4.1.890.1.15.3.59.4.3 This trap is sent when the port is turned
off to supply power because the
requested power exceeds the total PoE
power budget on the Switch.
temperature zyHwMonitorTemperatureOut
OfRange
1.3.6.1.4.1.890.1.15.3.26.2.2 This trap is sent when the temperature
goes above or below the normal
operating range.
voltage zyHwMonitorPowerSupplyVolt
ageOutOfRange
1.3.6.1.4.1.890.1.15.3.26.2.3 This trap is sent when the voltage goes
above or below the normal operating
range.
reset zySysMgmtUncontrolledSyste
mReset
1.3.6.1.4.1.890.1.15.3.49.2.1 This trap is sent when the Switch
automatically resets.
zySysMgmtControlledSystem
Reset
1.3.6.1.4.1.890.1.15.3.49.2.2 This trap is sent when the Switch resets
by an administrator through a
management interface.
zySysMgmtBootImageInconsi
stence
1.3.6.1.4.1.890.1.15.3.49.2.3 This trap is sent when the index number
of image which is loaded when the Switch
starts up is different from what is
specified via the CLI.
RebootEvent 1.3.6.1.4.1.890.1.5.1.1.2 This trap is sent when the Switch reboots
by an administrator through a
management interface.
timesync zyDateTimeTrapTimeServerNo
tReachable
1.3.6.1.4.1.890.1.15.3.82.3.1 This trap is sent when the Switch’s date
and time is not manually entered or the
specified time server is not reachable.
intrusionloc
k
zyPortIntrusionLock 1.3.6.1.4.1.890.1.15.3.61.3.2 This trap is sent when intrusion lock
occurs on a port.
loopguard zyLoopGuardLoopDetect 1.3.6.1.4.1.890.1.15.3.45.2.1 This trap is sent when loopguard shuts
down a port.