Chapter 14 Mirroring
GS3700/XGS3700 Series User’s Guide
166
Figure 110 Advanced Application > Mirroring (Stacking mode)
The following table describes the labels in this screen.
Table 69 Advanced Application > Mirroring
LABEL DESCRIPTION
Active Select this check box to activate port mirroring on the Switch. Clear this check box to disable
the feature.
Monitor Port The monitor port is the port you copy the traffic to in order to examine it in more detail without
interfering with the traffic flow on the original port(s). Type the port number of the monitor
port. In stacking mode, the first number represents the slot and the second the port number.
Slot
(Stacking
mode)
This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port
(Standalone
or stacking
mode)
This field displays the port number. In stacking mode, the first box field is the slot ID and the
second field is the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to
set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Mirrored Select this option to mirror the traffic on a port.
Direction Specify the direction of the traffic to mirror by selecting from the drop-down list box. Choices
are Egress (outgoing), I ngress (incoming) and Both.
To Next Page
Loading...
