Chapter 14 Mirroring
GS3700/XGS3700 Series User’s Guide
169
Figure 113 Advanced Application > Mirroring > RMirror > Source (Stacking mode)
The following table describes the labels in this screen.
Table 71 Advanced Application > Mirroring > RMirror > Source
LABEL DESCRIPTION
RMirror VLAN ID Select the RMirror VLAN over which the mirrored traffic is forwarded.
Priority Enter the priority of the mirrored traffic.
Reflector Port Select the check box to enable the specified reflector port.
Enter the number of reflector port that adds the RMirror VLAN tag to all mirrored traffic
and forwards traffic to the connected port(s) in the same RMirror VLAN.
Slot (Stacking mode) This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Port (Standalone or
stacking mode)
This field displays the port number. In stacking mode, the first box field is the slot I D
and the second field is the port number.
To Next Page
Loading...
