Chapter 34 Green Ethernet
GS3700/XGS3700 Series User’s Guide
342
The following table describes the labels in this screen.
Table 166 Advanced Application > Green Ethernet
LABEL DESCRIPTION
EEE Select this to activate Energy Efficient Ethernet globally.
Auto Power Down Select this to activate Auto Power Down globally.
Short Reach Select this to activate Short Reach globally.
Slot (Stacking mode) This field appears only in stacking mode. Click the drop-down list to choose the
slot number of the Switch in a stack.
Port (Standalone or
stacking mode)
This field displays the port number. In stacking mode, the first box field is the slot
ID and the second field is the port number. * means all ports (on the same
Switch).
1/ * Use this row to make the setting the same for all ports. Use this row first and then
make adjustments to each port if necessary.
Note: Changes in this row are copied to all the ports as soon as you make them.
EEE Select this to activate Energy Efficient Ethernet on this port.
Auto Power Down Select this to activate Auto Power Down on this port.
Short Reach Select this to activate Short Reach on this port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
