Chapter 35 Link Layer Discovery Protocol (LLDP)
GS3700/XGS3700 Series User’s Guide
370
Datum Select the appropriate geodetic datum used by GPS.
• WGS84
• NAD83-NAVD88
• NAD83-MLLW
Civic Address Enter the Civic Address by providing information such as Country, State, County, City,
Street, Number, ZIP code and other additional information. Enter at least two field in this
configuration including the Country. The valid length of the Country field is 2 characters
and all other fields are up to 32 characters.
• Country
• State
• County
• City
• Division
• Neighbor
• Street
• Leading-Street-Direction
• Street-Suffix
• Trailing-Street-Suffix
• House-Number
• House-Number-Suffix
• Landmark
• Additional-Location
• Name
• Zip-Code
• Building
• Unit
• Floor
• Room-Number
• Place-Type
• Postal-Community-Name
• Post-Office-Box
• Additional-Code
ELIN Number Enter a numerical digit string, corresponding to the ELIN identifier which is used during
emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. The valid length is
from 10 characters to 25 characters.
Add Click Add after finish entering the location information.
Cancel Click Cancel to begin entering the location information afresh.
Index This lists the index number of the location configuration. Click an index number to view
or edit the location.
Port This lists the port number of the location configuration. In stacking mode, the first
number represents the slot and the second the port number.
Location
Coordinates
This field displays the location configuration information based on geographical
coordinates that includes longitude, latitude, altitude and datum.
Civic Address This field displays the Civic Address for the remote device using information such as
Country, State, County, City, Street, Number, ZIP code and additional information.
ELIN Number This field shows the Emergency Location Identification Number (ELIN), which is used to
identify endpoint devices when they issue emergency call services. The valid length is
form 10 characters to 25 characters.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Table 179 Advanced Application > LLDP > LLDP-MED Location
LABEL DESCRIPTION