Chapter 36 Anti-Arpscan
GS3700/XGS3700 Series User’s Guide
377
Trusted State Select Untrusted or Trusted for the associated port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click this to reset the values in this screen to their last-saved values.
Table 183 Advanced Application > Anti-Arpscan > Configure
LABEL DESCRIPTION
To Next Page
Loading...
