Chapter 37 BPDU Guard
GS3700/XGS3700 Series User’s Guide
380
Figure 277 Advanced Application > BPDU Guard > BPDU Guard Configuration
The following table describes the fields in the above screen.
Table 185 Advanced Application > BPDU Guard > BPDU Guard Configuration
LABEL DESCRIPTION
Active Select this option to enable BPDU guard on the Switch.
Port This field displays the Switch’s port number
* Use this row to make the setting the same for all ports. Use this row first and then
make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable the BPDU guard feature on this port. The Switch shuts
down this port if there is any BPDU received on the port.
Clear this check box to disable the BPDU guard feature.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
