Chapter 43 DHCP
GS3700/XGS3700 Series User’s Guide
421
Figure 311 IP Application > DHCP > DHCPv4 > VLAN
The following table describes the labels in this screen.
Table 209 IP Application > DHCP > DHCPv4 > VLAN
LABEL DESCRIPTION
VID Enter the ID number of the VLAN to which these DHCP settings apply.
DHCP Status Select whether the Switch should function as a DHCP Server or Relay for the specified
VID. If you select Server then fields related to DHCP relay configuration are grayed out
and vice versa.
Server Use this section if you want to configure the Switch to function as a DHCP server for this
VLAN.
Client I P Pool
Starting
Address
Specify the first of the contiguous addresses in the I P address pool.
Size of Client
IP Pool
Specify the size, or count of the IP address pool. The Switch can issue from 1 to 253 IP
addresses to DHCP clients.
IP Subnet
Mask
Enter the subnet mask for the client IP pool.
Default
Gateway
Enter the IP address of the default gateway device.
Primary/
Secondary
DNS Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP clients
along with the IP address and the subnet mask.
Lease Time Select I nfinite to have the binding always valid. Select the second radio button to set up
the binding’s valid days, hours and minutes.
To Next Page
Loading...
