Chapter 43 DHCP
GS3700/XGS3700 Series User’s Guide
429
Interface I D Select this option to have the Switch add the interface-ID option in the DHCPv6 requests
from the clients in the specified VLAN before the Switch forwards them to a DHCPv6 server.
Remote I D Enter a string of up to 64 printable characters to be carried in the remote-ID option. The
Switch adds the remote-ID option in the DHCPv6 requests from the clients in the specified
VLAN before the Switch forwards them to a DHCPv6 server.
Add Click this to create a new entry or to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields to their last saved values.
Clear Click Clear to reset the fields to the factory defaults.
VID This field displays the VLAN ID number. Click the VLAN ID to change the settings.
Helper Address This field displays the IPv6 address of the remote DHCPv6 server for this VLAN.
Interface ID This field displays whether the interface-ID option is added to DHCPv6 requests from clients
in this VLAN.
Remote ID This field displays whether the remote-ID option is added to DHCPv6 requests from clients in
this VLAN.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Check the entry(ies) that you want to remove and then click the Delete button.
Cancel Click Cancel to clear the selected checkbox(es).
Table 214 IP Application > DHCP > DHCPv6> DHCPv6 Relay (continued)
LABEL DESCRIPTION
To Next Page
Loading...
