Chapter 47 Maintenance
GS3700/XGS3700 Series User’s Guide
449
Figure 340 Management > Maintenance > Firmware Upgrade (Stacking mode)
The top of firmware upgrade screen shows which firmware version is currently running on the
Switch. Type the path and file name of the firmware file you wish to upload to the Switch in the File
Path text box or click Brow se to locate it. Firmware upgrades are only applied after a reboot. Click
Upgrade to load the new firmware. Select the Config Boot I mage drop-down list box if you want
to reboot the Switch and click Apply to apply the new firmware immediately. Click Upgrade to load
the new firmware.
After the firmware upgrade process is complete, see the System I nfo screen to verify your current
firmware version number.
Table 223 Management > Maintenance> Firmware Upgrade
LABEL DESCRIPTION
Slot (Stacking
mode)
This is the slot index number.
Nam e This is the name of the Switch that you’re configuring.
Status (Stacking
m ode)
This field displays the current stacking status on the Switch.
To Next Page
Loading...
