Chapter 5 ZON Utility, ZON Neighbor Management and Port Status
GS3700/XGS3700 Series User’s Guide
53
Figure 23 Port Status: Port Details
The following table describes the labels in this screen.
Table 9 Port Status: Port Details
LABEL DESCRIPTION
Port Info
Port NO. This field displays the port number you are viewing. In stacking mode, the first number
represents the slot and the second the port number.
Name This field displays the name of the port.
Link This field displays the speed (such as 100M for 100Mbps, 10 00 M for 1000 Mbps, or 10G
for 10 Gbps) and the duplex (F for full duplex).
State If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see
Section 11.1.3 on page 133 for more information).
If STP is disabled, this field displays FORW ARDI NG if the link is up, otherwise, it displays
STOP.
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port
To Next Page
Loading...
