ZyXEL Communications XGS4600 Series - Page 120

Chapter 8 Basic Setting
XGS4600 Series User’s Guide
120
Figure 94 Basic Setting > Stacking > Configuration
The following table describes the labels in this screen.
Table 40 Basic Setting > Stacking > Configuration
LABEL DESCRIPTION
Active Select the Active check box to put the Switch in stacking mode. This will erase the running
configuration, config01 and config02. The master Switch’s login will remain unchanged. If you
want to reload a previous configuration, please back one up first.
Apply Click Apply to activate the stacking mode.
Cancel Click Cancel to clear the Active check box.
Force Master
Mode
Select the Force Master Mode check box to force this Switch to become a master Switch.
System Priority Enter a number (from1 to 63) to assign a priority for the stacking Switch. The higher the number,
the higher the priority.
Apply Click Apply to save the Active Force Master Mode and System Priority fields.
Cancel Click Cancel to clear the Active Force Master Mode and System Priority fields.
Slot ID Freeze Click the Freeze button to have the Switch retain its slot ID after reboot.
Slot This field displays the slot or port channel of the stacked Switch.
MAC Address This field displays the MAC address of the stacked Switch.
Type This field displays the model name of the Switch.
Slot ID After
Reboot
Choose Auto to have a new slot ID assigned after reboot. If you want to keep the original slot ID
after reboot, you can click Freeze or select an ID in the Slot ID After Reboot list box.
Apply Click Apply to save the Slot ID After Reboot field.
Cancel Click Cancel to clear the Slot ID After Reboot field.