Chapter 24 VLAN Stacking
XGS4600 Series User’s Guide
254
Figure 195 Advanced Application > VLAN Stacking > Port-based QinQ (Standalone Mode)
Figure 196 Advanced Application > VLAN Stacking > Port-based QinQ (Stacking Mode)
The following table describes the labels in this screen.
Table 98 Advanced Application > VLAN Stacking > Port-based QinQ
LABEL DESCRIPTION
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of the
Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID and the
second is the port number. Please note that the default stacking ports (the last two ports of your
Switch) cannot be configured. They are reserved for stacking only.
To Next Page
Loading...
