Chapter 26 AAA
XGS4600 Series User’s Guide
294
26.6.4.3 Attributes Used for Accounting IEEE 802.1x Events
The attributes are listed in the following table along with the time of the session they are sent:
Acct-Session-Time
Acct-Terminate-Cause
Table 120 RADIUS Attributes – Exec Events through Telnet/SSH
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
NAS-Identifier
NAS-IP-Address
Service-Type
Calling-Station-Id
Acct-Status-Type
Acct-Delay-Time
Acct-Session-Id
Acct-Authentic
Acct-Session-Time
Acct-Terminate-Cause
Table 119 RADIUS Attributes – Exec Events through Console (continued)
ATTRIBUTE START INTERIM-UPDATE STOP
Table 121 RADIUS Attributes – Exec Events through Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
NAS-IP-Address
NAS-Port
Class
Called-Station-Id
Calling-Station-Id
NAS-Identifier
NAS-Port-Type
Acct-Status-Type
Acct-Delay-Time
Acct-Session-Id
Acct-Authentic
Acct-Input-Octets
Acct-Output-Octets
Acct-Session-Time
Acct-Input-Packets
To Next Page
Loading...
