Chapter 43 OAM
XGS4600 Series User’s Guide
414
Figure 331 Advanced Application > OAM Status (Standalone Mode)
Figure 332 Advanced Application > OAM Status (Stacking Mode)
The following table describes the fields in the above screen.
Table 188 Advanced Application > OAM Status
LABEL DESCRIPTION
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
Local
This section displays information about the ports on the Switch.
Port This field displays the port number. In stacking mode, the first number represents the slot ID
and the second is the port number. Please note that the default stacking ports (the last
two ports of your Switch) cannot be configured. They are reserved for stacking only.
To Next Page
Loading...
