Chapter 43 OAM
XGS4600 Series User’s Guide
419
Figure 334 Advanced Application > OAM > OAM Configuration (Standalone Mode)
Figure 335 Advanced Application > OAM > OAM Configuration (Stacking Mode)
The following table describes the fields in the above screen.
Table 190 Advanced Application > OAM > OAM Configuration
LABEL DESCRIPTION
Active Select this option to enable Ethernet OAM on the Switch.
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
To Next Page
Loading...
