Chapter 57 ARP Setup
XGS4600 Series User’s Guide
515
Figure 421 IP Application > ARP Setup > ARP Learning (Standalone Mode)
Figure 422 IP Application > ARP Setup > ARP Learning (Stacking Mode)
The following table describes the labels in this screen.
Table 247 IP Application > ARP Setup > ARP Learning
LABEL DESCRIPTION
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID and
the second is the port number. Please note that the default stacking ports (the last two ports of
your Switch) cannot be configured. They are reserved for stacking only.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
To Next Page
Loading...
