ZyXEL Communications XGS4600 Series - Page 567

Chapter 62 Syslog Setup
XGS4600 Series User’s Guide
567
Cancel Click Cancel to begin configuring this screen afresh.
Clear Click Clear to return the fields to the factory defaults.
Index This is the index number of a syslog server entry. Click this number to edit the entry.
Active This field displays Yes if the device is to send logs to the syslog server. No displays if the
device is not to send logs to the syslog server.
IP Address This field displays the IP address of the syslog server.
UDP Port This field displays the port of the syslog server.
Log Level This field displays the severity level of the logs that the device is to send to this syslog server.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Click Delete to remove the selected entries.
Cancel Click Cancel to begin configuring this screen afresh.
Table 273 Management > Syslog Setup (continued)
LABEL DESCRIPTION